Manufactured from our own special blend of plastic to provide strong and flexible sparring blade. The blades are designed to be used with low/medium protection (we recommend a fencing mask, stiff throat protector, fencing coach's jacket and decent lacrosse gloves). They are manufactured to be safe in the thrust and are designed to flex well towards the tip of the blade. Please use responsibly. If in doubt contact us.
Blade Length 96.5cm (38")
Total Length 118cm (46 1/2"
Combat Rating = 10 of 10 with apropriate use
Design - Our swords are designed as the ultimate training tool. They can be used like a waster for Drilling and Pell Work and can also be used for Sparring (with appropriate protection).
The Blades are constructed to flex in the last 1/3 towards the tip. This gives us a blade that can be used for thrusting (protection should ALWAYS be worn) without being whippy. The blade/tang joint (traditionally a weak point) is reinforced by a steel rod running along the full length of the handle. This also removes any flex in the handle traditionally associated with plastic training swords. Design images below are of the single hander sword only.
The Standard Guard is constructed from reinforced high impact plastic. The ball shaped quillons are designed for safety when sparring (large surface area = less chance of being impaled).
They are modelled using the same dimensions as seen on an existing 15th Century Longsword. This is a nice example of a historical design that helps us with safe sparring.
The slide on Grips are constructed from a thermoplastic elastomer to provide the feel of leather over wood. They offer excellent impact absorption without feeling spongy.
The Pommel is constructed from high impact plastic. This provides our swords with excellent balance and makes them safer than metal pommels for pommel strikes. A brass nut is moulded into the pommel to provide a tight metal on metal joint to the tang.
The swords can be taken apart easily by unscrewing the pommel. This not only makes transporting them easy – it also allows you to customise your sword with our range of interchangeable parts (available separately).
The swords weigh about 2/3 of the weight of a real sword. This is designed to lower the impact when sparring. The weight is kept back towards the hilt further lessening this impact. They are very well balanced and are heavier than most wooden wasters on the market.
Our range of swords is manufactured in the U.K to the highest quality. They are constructed from reinforced high impact plastic (U.K. sourced for quality control) instead of cheaper plastics used by other manufacturers.
We use recycled materials when available. Whilst this does not reflect in the quality of the product it does lessen the impact on the planet.
Competitions & Sparring – Our range of swords are the only ones approved for the International Open Championships. They are being further considered for other major events.
Drilling & Pell Work – Excellent balance and durability make these swords an ideal training tool. Change parts such as complex hilts make them excellent for a variety of disciplines.
Theatre & T.V. – Synthetic swords are safer than steel/aluminium and spray up very easily. The variety of change parts will provide the means to make many different styles of sword at a very low cost.
Safe Training/Transportation in Public – Society is increasingly cracking down on the carrying of weapons in public places. Our training swords are much more acceptable in public than steel swords. They can also be disassembled very quickly for easy transportation.
To produce this range we worked very closely with the HEMA/WMA community to give them the product that they wanted.
Dave Rawlings, founder of the Boars Tooth Fight School was the catalyst behind this range and he has thoroughly tested and endorsed these products.
"The new synthetic swords have been developed by HEMA practitioners for HEMA practitioners, using our experience of the last decade of training and competition. They behave more like original steel swords than other plastic swords, and they handle more like antique swords than many of the steel replicas out there. Being plastic, they offer far greater safety than steel weapons. This increased safety, coupled with realism, should enable us to take our arts to the next level, particularly in competitive bouting. Matt Easton
Schola Gladiatoria -UK"
The new sparring range is something we have been waiting and hoping on for many years. The first mass produced, affordable and realistic western martial arts simulators available will allow the Western martial arts to be a lot more accessible, whilst allowing our current members to train to very high intensity levels whilst remaining safe.
This new range of training swords will transform what we do in the club, bringing beginners and advanced students together and allowing us much more flexibility for melee games and scenario based training, as well as full contact tournaments.
NOTE: No permit needed for Victoria as this is not classed as a sword.
Posted by M Boyd on 10th Aug 2015
I bought this longsword blade to use with a basket hilt for studying Silver's system.
Silver recommends a sword of 38" blade length for someone of my height and this blade perfectly suits.
The tang requires some modification- trimming the excess length with a hacksaw, remembering to leave sufficient length for the pommel to screw on. I carefully cut the plastic of the tang in 1cm lengths and then used pliers to "unscrew" the plastic off the threaded rod.
When mounted on the basket hilt it was quite blade heavy but this can be improved by using a steel pommel with an M8 thread. Alternatively, cut an appropriate length of 2" steel bar and drill an 8mm hole through the centre. This can be held on with a standard M8 nut- or use a nylock so it won't come undone with vibration.
Choose a currency below to display product prices in the selected currency.
Add to Wish List
You Recently Viewed...